KHK KWGDLS3-R1, Module 3, Single Start, Duplex Worm Shafts

Documentation

PDF Catalog
Selection Guide / Technical Info.
Detailed Drawing
KHK KWGDLS3-R1, Module 3, Single Start, Duplex Worm Shafts
Duplex Worms (KWGDL - KWGDLS)

High-precision duplex worms with superior strength. A range of backlash values can be obtained by moving the worm axially.


There is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data for any purpose. The user accepts the data "as is", and assumes all risks associated with its use. KHK USA assumes no responsibility for actual or consequential damage incurred as a result of any user's reliance on this data.

Please note that all J-Series, F-Series, & H-Series products are made-to-order, noncancellable, and non-returnable.

Price: $381.89 (See below for quantity breaks.)

Pricing Structure

Qty Range1 – 910 – 2425 – 4950 – 99100 – 249250 – 499500 – 9991000+
Price/Unit$381.89$367.71$353.53$339.35$325.17$310.99$296.81$282.63
Available On Hand Inventory*: 0
3 Day Delivery (Factory Direct) Inventory*: 5
Backorder Availability*: An additional 16 pieces in 1 week(s) ARO.
*Approximate inventory level subject to prior sale and availability. If you require more product than is available, please contact us at (516) 248-3850.


Quantity:

KHK KWGDLS3-R1, Module 3, Single Start, Duplex Worm Shafts Specifications

Metric Inch
Gear Type
Worm Gears
Construction
Duplex Worm Shafts
Nominal Axial Module
3
Number of Start
1
Nominal Lead Angle
3°54'
Hand of Thread
Right Hand
Shape
W6
Shaft Diameter / Bore (A)
40.2 (mm)
Shaft Length Left (F')
100.0 (mm)
Pitch Diameter (P)
44.0 (mm)
Face Width (M)
54.00 (mm)
Shaft Length Right (F)
100.0 (mm)
Neck Length Left
18 (mm)
Neck Length Right
28 (mm)
Position of Reference Tooth
32.0 (mm)
Max Allowable Shift (Vmax)
10.0 (mm)
Neck Diameter
34.0 (mm)
Total Length (J)
300.00 (mm)
Weight
2.95000 (kg)
Precision Grade
KHK W 001 grade 1
Reference Section of Gear
Axial
Gear Teeth Type
Standard Full Depth
Pressure Angle
17°30'
Material
SCM440 (AISI 4140) Alloy Steel
Heat Treatment
Thermal Refined, tooth surface Induction Hardened
Tooth Hardness
HRC 50-60
Surface Treatment
Black oxide coated except for ground part