KHK SUSL0.5-100, Module 0.5, 100 Tooth, Fairloc® Hub Stainless Steel Gears - Fairloc® is a registered trademark of Designatronics

Documentation

PDF Catalog
Selection Guide / Technical Info.
Detailed Drawing
KHK SUSL0.5-100, Module 0.5, 100 Tooth, Fairloc® Hub Stainless Steel Gears - Fairloc® is a registered trademark of Designatronics
Stainless Steel Fairloc® Hub Spur Gears (SUSL) - Fairloc® is a registered trademark of Designatronics

Fine-pitch gears with rust resistance, enabled to clamp to shafts without any keys or set screws. Contact www.designatronics.com for additional information.


There is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data for any purpose. The user accepts the data "as is", and assumes all risks associated with its use. KHK USA assumes no responsibility for actual or consequential damage incurred as a result of any user's reliance on this data.

Please note that all J-Series, F-Series, & H-Series products are made-to-order, noncancellable, and non-returnable.

Notice: This product is discontinued, but does have an alternate. Please see the alternate compatible product.

Alternate Replacement Product

KHK SUSF0.5-100, Module 0.5, 100 Tooth, F-Loc Hub Stainless Steel Gears

These fine pitch, stainless steel spur gears have an integral hub locking mechanism which enables the gear to be fastened to the shaft without any keys or set screws.

View Alternate Product for SUSL0.5-100.

KHK SUSL0.5-100, Module 0.5, 100 Tooth, Fairloc® Hub Stainless Steel Gears - Fairloc® is a registered trademark of Designatronics Specifications

Metric Inch
Gear Type
Spur Gears
Construction
Fairloc® Hub Stainless Steel Gears
Bore Type
Fairloc®
Module
0.5
No. of teeth
100
Shape
S1
Bore (A)
10.0 (mm)
Hub Diameter (B)
24.0 (mm)
Pitch Diameter (C)
50.00 (mm)
Outer Diameter (D)
51.00 (mm)
Face Width (E)
5.0 (mm)
Hub Width (F)
14.0 (mm)
Total Length (G)
19.00 (mm)
Bending Strength (N-m)
3.0200
Surface Durability (N-m)
0.8200
Bending Strength (kgf-m)
0.3080
Surface Durability (kgf-m)
0.0836
Backlash
0-0.10 (mm)
Weight
0.11000 (kg)
Precision Grade
JIS grade N8 (JIS B1702-1:1998) JIS grade 4 (JIS B1702:1976)
Gear Teeth Type
Standard full depth
Pressure Angle
20°
Material
SUS303 (AISI 303) Stainless Steel
Tooth Hardness
(less than 187HB)
Reference Slipping Torque
4.3
Recommended Fastening Torque (Nm)
0.80
Cap Screw Size
M4
Cap Screw Offset from Hub
4.9 (mm)
Cap Screw Offset from Center
8.0 (mm)
Alternate ID
SUSF0.5-100