KHK DSL0.5-100, Module 0.5, 100 Tooth, Fairloc® Hub Acetal Spur Gears - Fairloc® is a registered trademark of Designatronics

Documentation

PDF Catalog
Selection Guide / Technical Info.
Detailed Drawing
KHK DSL0.5-100, Module 0.5, 100 Tooth, Fairloc® Hub Acetal Spur Gears - Fairloc® is a registered trademark of Designatronics
Acetal Fairloc® Hub Spur Gears (DSL) - Fairloc® is a registered trademark of Designatronics

Fine-pitch gears can be used without lubrication, easily clamped to shafts without any keys or set screws. Contact www.designatronics.com for additional information.


There is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data for any purpose. The user accepts the data "as is", and assumes all risks associated with its use. KHK USA assumes no responsibility for actual or consequential damage incurred as a result of any user's reliance on this data.

Please note that all J-Series, F-Series, & H-Series products are made-to-order, noncancellable, and non-returnable.

Notice: This product is discontinued, but does have an alternate. Please see the alternate compatible product.

Alternate Replacement Product

KHK DSF0.5-100, Module 0.5, 100 Tooth, F-Loc Hub Polyacetal Spur Gears

These fine pitch, acetal spur gears have an integral stainless steel hub locking mechanism which enables the gear to be fastened to the shaft without any keys or set screws.

View Alternate Product for DSL0.5-100.
Error: Product pricing is not available at this time. Please check back again.

KHK DSL0.5-100, Module 0.5, 100 Tooth, Fairloc® Hub Acetal Spur Gears - Fairloc® is a registered trademark of Designatronics Specifications

Metric Inch
Gear Type
Spur Gears
Construction
Fairloc® Hub Acetal Spur Gears
Bore Type
Fairloc®
Module
0.5
No. of teeth
100
Shape
S1
Bore (A)
8.0 (mm)
Hub Diameter (B)
17.0 (mm)
Pitch Diameter (C)
50.00 (mm)
Outer Diameter (D)
51.00 (mm)
Face Width (E)
5.0 (mm)
Hub Width (F)
9.8 (mm)
Total Length (G)
14.80 (mm)
Bending Strength (N-m)
1.7800
Bending Strength (kgf-m)
0.1820
Backlash
0-0.10 (mm)
Weight
0.02660 (kg)
Precision Grade
JIS grade N10 (JIS B1702-1:1998) JIS grade 6 (JIS B1702:1976)
Gear Teeth Type
Standard full depth
Pressure Angle
20°
Material
Duracon® Acetal with SUS303 Stainless Steel core
Tooth Hardness
(110-120HRR)
Reference Slipping Torque
3.45
Recommended Fastening Torque (Nm)
0.80
Cap Screw Size
M3
Cap Screw Offset from Hub
4.3 (mm)
Cap Screw Offset from Center
5.9 (mm)
Alternate ID
DSF0.5-100