KHK DSL0.5-28, Module 0.5, 28 Tooth, Fairloc® Hub Acetal Spur Gears  - Fairloc® is a registered trademark of Designatronics

Documentation

PDF Catalog
Selection Guide / Technical Info.
Detailed Drawing
KHK DSL0.5-28, Module 0.5, 28 Tooth, Fairloc® Hub Acetal Spur Gears - Fairloc® is a registered trademark of Designatronics
Acetal Fairloc® Hub Spur Gears (DSL) - Fairloc® is a registered trademark of Designatronics

Fine-pitch gears can be used without lubrication, easily clamped to shafts without any keys or set screws. Contact www.designatronics.com for additional information.


There is no guarantee or representation to the user as to the accuracy, currency, suitability or reliability of this data for any purpose. The user accepts the data "as is", and assumes all risks associated with its use. KHK USA assumes no responsibility for actual or consequential damage incurred as a result of any user's reliance on this data.

Please note that all J-Series, F-Series, & H-Series products are made-to-order, noncancellable, and non-returnable.

Notice: This product is discontinued.
Please contact KHK for alternative solutions by calling 516-248-3850 or filling out the form below.
Anything you would like specific help with?
Error: Product pricing is not available at this time. Please check back again.

KHK DSL0.5-28, Module 0.5, 28 Tooth, Fairloc® Hub Acetal Spur Gears - Fairloc® is a registered trademark of Designatronics Specifications

Metric Inch
Gear Type
Spur Gears
Construction
Fairloc® Hub Acetal Spur Gears
Bore Type
Fairloc®
Module
0.5
No. of teeth
28
Shape
S1
Bore (A)
5.0 (mm)
Hub Diameter (B)
14.0 (mm)
Pitch Diameter (C)
14.00 (mm)
Outer Diameter (D)
15.00 (mm)
Face Width (E)
5.0 (mm)
Hub Width (F)
8.5 (mm)
Total Length (G)
13.50 (mm)
Bending Strength (N-m)
0.3900
Bending Strength (kgf-m)
0.0398
Backlash
0-0.10 (mm)
Weight
0.01080 (kg)
Precision Grade
JIS grade N10 (JIS B1702-1:1998) JIS grade 6 (JIS B1702:1976)
Gear Teeth Type
Standard full depth
Pressure Angle
20°
Material
Duracon® Acetal with SUS303 Stainless Steel core
Tooth Hardness
(110-120HRR)
Reference Slipping Torque
1.6
Recommended Fastening Torque (Nm)
0.60
Cap Screw Size
M2.5
Cap Screw Offset from Hub
3.3 (mm)
Cap Screw Offset from Center
4.4 (mm)